产物核心

接洽我们

地址:佛山市当涂科技园丰满园路10号C315室
发卖冷线:400-628-1401 0571-81389091
电话:18758166226 方司理

   13738027672 王司理

E-mail:web@zjhualang。com

全钢透风柜

全钢透风柜

    柜体外壳:采用1.2mm厚精良一级冷轧/镀锌钢板为基材,全自动压模成型;概况经酸洗、磷化、环氧树脂粉末静电喷涂措置,概况无突出漆块,光洁亮丽,抗强酸强碱性能精采。上柜支架采用厚2.0mm冷轧方管焊制而成,概况经酸洗、磷化、环氧树脂粉末静电喷涂措置。规格:1200x800x2350mm,1500x800x2350mm,1800x800x2350mm。
Shell: 1.2mm cold rolled/galvanized steel, automatic molding; the su***ce is acid cleaned, phosphating-washed and sprayed with epoxy powder, bright and clean, achieving good performance of anti-acid and alkali.
Rack of the upper supporter is made of 2.0mm cold-rolled welded square steel, the su***ce is acid cleaned, phosphating-washed and sprayed with epoxy powder. Specifications: 1200x800x2350mm, 1500x800x2350mm,1800x800x2350mm.

 

内衬板:采用6mm厚耐酸碱抗倍特板创造而成,其机关设计对爆炸无释压浸染。
导流板:具导流效率,其材质同内衬板,导流板安装地位与角度可使排气分布均匀,无死角,在尺度状态下,导流板上方与中、下方出风口排风量比例各约50(±10%),以确保分歧比轻之气体均能无用打消;并具角度可调设计,可长进中、下方出风口排风量比例至80%及以上,能更无用排放分歧密度气体,顺应分歧的尝试需求。
集气风罩:采用高分子塑胶材质模塑一体成型锥形缩口耐酸碱集气罩,底部入口为长方形开口,集气罩存在精采锥形集气角度及圆度,可获得精采的集气均匀性及高压损。
视窗:采用5mm厚保险玻璃(应用氢氟酸情况下,调换为无机玻璃板)。
照明设备:采用全罩式灯座设计(具散冷孔),底部设无5mm厚保险玻璃
钢索:采用PVC包覆钢索。
电源:220V10A澳门新濠复兴万用插座,可匹配各类仪器插头。灯罩内附220V、30W日光灯两支.
Lined plate: 6mm thick, acid and alkali resistance, its structure can release pressure towards explosion.
Deflector: diversion function, same material as lined plate, installation location and angle can make the exhaust evenly distributed, no dead ends, under the standard conditions, the diversion board side and the bottom outlet exhaust volume ratio of about 50 (±10%) to ensure that the different proportion of the gas can be effectively ruled out; with angle adjustable design can increase middle, under outlet exhaust volume ratio to 80% and above ,would be more effective emission of different densities gases, adapt to different experimental needs.
Gas gathering wind cover: polymer plastic molded ,the bottom of the entrance of the rectangular opening is square, the cover has good gas gathering angle and roundness, get a average distribution and low pressure loss.
Windows: 5mm safety glass (under hydrofluoric acid environment, replace with plexiglass plate).
Lighting: full face design (with vents), and the bottom with 5mm safety glass, included two 220V, 30W fluorescent.
The cable: PVC-coated steel cable.
Power: 220V10A laboratory sockets, can match a variety of instrument plug.
上一页
我公司轻要生产:尝试台透风柜专用柜防腐透风柜澳门新濠复兴配件钢木尝试台全钢尝试台全木尝试台全钢透风柜全木透风柜pp透风柜药品柜等产物